Car Parking Shade SPARK (ALS Project Site)
Car Parking Shade SPARK case study: supply, delivery, and installation of HDPE shade covers for the ALS project site at SPARK (near Abqaiq) under WestCon coordination. The job focused on bay alignment, reinforced edges, reliable fastening points, and a finish that stays stable in daily site operations.
Project Overview
The requirement was shaded parking coverage for an active industrial site. The selected solution was an HDPE net shade package with reinforced edges and controlled tensioning, aligned to the project specification requirements for fastening and corner detailing.
Car Parking Shade SPARK
- ✓Supply + delivery + installation of shade covers for ALS site at SPARK.
- ✓Planned coverage: approx. 396 m² (as per site requirement).
- ✓Fabric build: HDPE net, 325 GSM, reinforced stitching (as specified).
- ✓Handover intent: stable tension, straight bays, secure fixing points.
Materials & Technical Notes
- ✓Cover: HDPE net fabric (325 GSM) with reinforcement stitching.
- ✓Edge / fastening approach: reinforced edges and tensioning hardware selected to suit project requirements.
- ✓Corner detailing: high-stress points reinforced to reduce early wear.
- ✓Finish intent: consistent edge lines and controlled tension across bays.
Outcome for the Site
The installed shade coverage improved parking comfort for staff and reduced direct heat exposure on vehicles during peak hours. The execution priority was stable edges, clean alignment, and consistent tensioning across bays for practical daily operations.
Project Photos
FAQ
Why HDPE net shade for an industrial site like SPARK?
HDPE net shades are practical in high-heat environments where airflow matters. They reduce heat impact while staying lighter than fully waterproof membranes for open parking areas.
What does 325 GSM mean for the customer?
It refers to fabric weight per square meter. Higher GSM usually indicates a more substantial fabric build, but final performance depends on reinforcement, fastening details, and correct tensioning on site.
Do you provide drawings and datasheets for procurement?
Yes. Where procurement submissions are required, we share drawings, datasheets and references during the formal procurement stage so the submittal matches what is supplied and installed.
How do you avoid loose edges and early sagging?
Most failures start at edges and corners. We focus on reinforcement details, secure fastening points, consistent tensioning, and final inspection before handover.
What do you need to quote a similar project?
Send site location, approximate area or bay count, preferred cover type (HDPE/PVC), and any requirements for drawings or approvals. We’ll confirm layout and provide a BOQ-based quotation.
Need a Car Parking Shade for Your Site?
Send your bay count or site dimensions. We’ll propose a practical layout and a BOQ-based quotation that matches your use-case and timeline.